My DIY Offspring

By Paul Marossy    

Last updated 12/4/04    

Here is some of the stuff I have built over the last three years or so.

	Here is some of my DIY stompboxes. Top row, from left to right: TS808 Tube Screamer, Easy Drive, EA Tremolo, Bulldog speaker cab simulator, Freddie Fuzz, Blackfire. Middle row, left to right: Blue Magic, AMZ Mini Driver, 3-Legged Dog, Metal Simplex, Mark Hammer's Chaos, BSIAB. Bottom row, left to right: FET Blender, Neg. Gnd. Boutique Fuzz Face, Orange Squeezer, Laurier's Vibrato, DOD 308 Yngwie Signature, Blue Clipper and Jawari. Click here for my stompbox page.
	My DIY pedal board made from a once flimsy bass guitar case. Click here for my pedal board page. At upper right is a tempo controller that I made for my Boss DD-5 digital delay.At lower left is my Modded Dunlop CryBaby which now has a vintage circuit in it.
	My compact DIY pedal board made from a thrift store case of some sort. Click here for my page on this project. Also on this little pedalboard is my Modded Ernie Ball Volume Pedal containing Craig Anderton's "Volume Pedal De-Scratcher".
	My DIY tube amps. At upper left, my slightly modded Octal Fatness sitting on its own 1x12 speaker cab . At upper right, my Firefly (Rev. 3) sitting on its own 2x8 speaker cab . In the middle, my Matchless Spitfire clone.
	My Little Gem. A good sounding solid state practice amp utilizing a 1/2 watt LM386 audio opamp. Click here for my page on this project.
	Built a couple of tube preamps. Pictured here is the " Real McTube II ". I also built something called the Radio-Head ", which uses some old radio tubes.
	I also like to add cooling fans to my commercially manufactured tube amps. Click here or here for some info on these projects.
	I made some preamp modules for my Seymour Duncan Convertible . Click here to see more.
	Here is an excursion into making DIY Tube Coolers.
	Here is an onboard FET guitar preamp that I retrofitted one of my guitars with. Click here for my page on this project.
	Here is my first guitar project. It started with a body that I bought off of ebay and things developed from there. Click here for my page on this project.